Adhesives

Adhesives

Adhesives,Grout and Tools: For sticking our products to your model and grouting in the joints or building free-standing models.

We provide a range of adhesives and tools suitable for use with all of our products.
 

Mortar/Grout Mix : A Grey Cement Based Adhesive which is suitable to use as a mortar or a grout with many of our products. Available to purchase in packs of 100g or 500g.

PVA Adhesive : A good quality PVA ideal for sticking all our products including Brickslips, Floor Tiles, Stone, Roof Tiles, Slate, Lead, Wood or Card. PVA can also be mixed 50/50 with water to seal the face of Brickslips, Flooring, Paving and Stone before grouting.

Colour Restorer : If you find that your brickwork has a slight grey residue after grouting, this product may help. You simply brush it on until it foams up then leave to dry. It will not remove surplus cement but it should help to restore the colour.

Ceramic Tile Grout Mix : A white ceramic tile grout suitable for grouting in Ceramic, Marble or Granite miniature tiles. Coverage approx. 100 sq ins. PLEASE NOTE: This grout is not suitable for using on brick or stone flooring, please use the Mortar/Grout Mix for these products.

UHU Glue : Ideal for sticking Versi Traditional Tiles or Versi Slates or Versi Flags to your Dolls house with no curling, making your Versi Tiles simple and quick to lay.

Tacky Glue : Ideal for sticking our Vinyl and Marble-Esque Floor Tiles, making your Vinyl Tiles simple and quick to lay.
PLEASE NOTE: This glue will not stick the Real Brick & Stone products, see our PVA Glue for this purpose, or the UHU Glue for the Versi products.

Modelling Tool: Ideal for cutting a wide range of our Real Brick, Stone & Slate products. Simply position the jaws across your Miniature Brick, Slip or Tile and press handle together for a quick and natural looking edge.

Grouting/Cleaning Sponge: Ideal for cleaning Grout off the face of any of our miniature products when grouting in, leaving you with a clean finish and Real Cement joints.

Cutting Blade Holder: Ideal for firmly securing our Cutting Blade to your Mini Drill or Dremel. PLEASE NOTE: You will need our cutting blade and a Dremel, or similar Mini Drill to be able to use this product.

Cutting Blade: Ideal for cutting all our Real Marble, Stone and Ceramic miniature tiles. PLEASE NOTE: You will need our cutting blade holder and a Dremel, or similar Mini Drill to be able to use this product.

Exterior Grade Water Resistant PVA: An all round exterior grade water resistant glue, suitable for all general outdoor modelling use. Perfect for sticking all our products including Brickslips, Floor Tiles, Stone, Roof Tiles, Slate, Lead or Wood. This product can also be mixed 50/50 with water to seal the face of Brickslips, Flooring, Paving and Stone before grouting.



Product Compare (0)


Mortar/Grout Mix - 100g Pack

Mortar/Grout Mix - 100g Pack

This is a Grey Cemen..

£1.95

Mortar/Grout Mix - 500g Pack

Mortar/Grout Mix - 500g Pack

This is a Grey Cemen..

£7.95

PVA Adhesive - 100ml

PVA Adhesive - 100ml

We recommend PVA adh..

£2.95

Colour Restorer - 100ml

Colour Restorer - 100ml

If you find that you..

£2.95

Ceramic Tile Grout Mix - 50g Pack

Ceramic Tile Grout Mix - 50g Pack

This white Ceramic t..

£1.95

UHU Glue - 60ml

UHU Glue - 60ml

60ml tube of UHU Glu..

£2.95

Tacky Glue - 60ml

Tacky Glue - 60ml

Ideal for sticking o..

£1.50

Modelling Tool

Modelling Tool

Ideal for cutting a ..

£4.95

Grouting / Cleaning Sponge

Grouting / Cleaning Sponge

Grouting Sponge. Ide..

£0.99

Cutting Blade Holder

Cutting Blade Holder

Ideal for firmly sec..

£2.00

Cutting Blade

Cutting Blade

Ideal for cutting a..

£2.00

Exterior Grade Water Resistant PVA - 100ml

Exterior Grade Water Resistant PVA - 100ml

An all round exterio..

£4.95

Showing 1 to 12 of 12 (1 Pages)