How to use Luxury Tile Range

How to use Real Ceramic Tiles

  1. Make sure the surface on which you are laying your tiles is clean and dry.
  2. Wipe the base of each tile with a damp cloth to remove any dust or grit.
  3. Either glue tiles in position shiny side uppermost with PVA adhesive OR lay using Ceramic tile adhesive following the instructions on the pack, with this method you can level them as you go. You can lay you tiles tight together or leave 1mm joints.
  4. Leave to dry.
  5. Grout with Ceramic Tile Grout as per the instructions on the pack.
  6. Clean off any excess grout and polish with a soft cloth.
  7. We provide a cutting service for these tiles. If you need tiles cut please supply us with accurate measurements. Cost 50p per cut.
 

How to use Decorative Ceramic Tiles

  1. Make sure the surface on which you are laying your tiles is clean and dry.
  2. Wipe the base of each tile with a damp cloth to remove any dust or grit.
  3. Decorative Ceramic Tiles are designed to make a pattern so lay a few tiles out without gluing first until you are happy with the effect.
  4. Either glue tiles in position shiny side uppermost with PVA adhesive OR lay using Ceramic tile adhesive following the instructions on the pack, with this method you can level them as you go. You can lay you tiles tight together or leave 1mm joints.
  5. Leave to dry.
  6. Grout with Ceramic Tile Grout as per the instructions on the pack.
  7. Clean off any excess grout and polish with a soft cloth.
  8. We provide a cutting service for these tiles. If you need tiles cut please supply us with accurate measurements. Cost 50p per cut.

How to use Luxury 1" Tiles

  1. Make sure the surface on which you are laying your tiles is clean and dry.
  2. Wipe the base of each tile with a damp cloth to remove any dust or grit.
  3. Either glue tiles in position shiny side uppermost with PVA adhesive OR lay using Ceramic tile adhesive following the instructions on the pack, with this method you can level them as you go. You can lay you tiles tight together or leave 1mm joints.
  4. Leave to dry.
  5. Grout with Ceramic Tile Grout as per the instructions on the pack.
  6. Clean off any excess grout and polish with a soft cloth.
  7. We provide a cutting service for these tiles. If you need tiles cut please supply us with accurate measurements. Cost 50p per cut.

There are no products to list in this category.