2" Tudor Brickslips
REAL BRICK Miniature 2 Inch Tudor Brickslips
Brickslips are thin slips of brick, to make your Wooden Dolls House or Model look like it has been built from solid brick.
Simply stick on with our PVA Glue and Grout in with our Mortar/Grout mix.
2" Tudor Brickslips are narrower gauge Brickslips which are usually used for patterned Brickwork.
This is particularly evident during the Tudor period on Old Beamed Properties.
The 2" Tudor Brickslips measure just 4mm in Height
TOP TIP
A handy tip to keep your Brickslips straight is to lay a ruler on your model & draw guide lines the ruler width apart from the top to the bottom of your model.
These Slips are ideal for cladding Wooden Models including Dolls Houses and give a FANTASTIC REAL BRICK FINISH to any model!
Don't forget your PVA Glue, Grout and Cornerslips to go with this product.
As a guide One bottle of PVA will stick 3000 Brickslips
and 500g of Mortar/Grout will grout approx 4000 Brickslips
Product information
Each 2" Brickslip is cut from REAL BRICK to 2.5mm Thick x 4mm High x 17.8mm Long
100 Brickslips cover an area of 13sq ins (2" x6 1/2") or 78 Sq cm ( 8 cm Tall x 10 cm Long ) when stuck to your model leaving a gap of approximately 1mm between each slip for the joints.500 Brickslips cover an area of 64 sq ins (6 1/2" x 10") or 390 Sq cm (10 cm Tall x 39 cm Long) when stuck to your model leaving a gap of approximately 1mm between each slip for the joints.
1000 Brickslips cover an area of 128 Sq Ins (13" Tall x 10" Long) or 780 Sq cm ( 28 cm x 28 cm ) when stuck to your model leaving a gap of approximately 1mm between each slip for the joints.